Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth

Abstract This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.0025% capsaicin solution, and restoration. Data were analyzed with ANOVA, Kruskal-Wallis, Dunn, and Qui-Square tests (α=0.05). The highest fracture strength values were observed in REST (1508.96 ±148.15 N), without significant difference for the bleached groups (p>0.05), regardless of the antioxidant use. The hybrid layer thickness in the group that was not subjected to bleaching (REST) was significantly higher than in any other group. The bond strength in the bleached and antioxidants-treated groups (SA, AT, CRAN, CAP) has no differences with the bleached group without antioxidants (BL). Adhesive failures were predominant in the groups that did not receive the antioxidant application. In conclusion, the evaluated antioxidants did not show an effect on the fracture strength, hybrid layer thickness, or bond strength of dentin bleached after endodontic treatment. The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching.

Resumo Este estudo teve como objetivo avaliar o efeito de soluções antioxidantes na resistência à fratura e resistência de união em dentes tratados endodonticamente e clareados (38% de peróxido de hidrogênio). Cento e oitenta espécimes de dentina foram obtidos, 60 para cada teste: resistência à fratura, espessura da camada híbrida e resistência de união. Os grupos (n=10) foram compostos aleatoriamente de acordo com o protocolo pós-clareamento: REST - restauração, sem clareamento; BL - clareamento + restauração; SA - clareamento, solução de ascorbato de sódio a 10% e restauração; AT - clareamento, solução de α-tocoferol a 10% e restauração; CRAN - clareamento, solução de cranberry a 5% e restauração; CAP - clareamento, solução de capsaicina 0,0025% e restauração. Os dados foram analisados ​​com os testes ANOVA, Kruskal-Wallis, Dunn e Qui-Quadrado (α=0,05). Os maiores valores de resistência à fratura foram observados em REST (1508,96 ±148,15 N), sem diferença significativa para os grupos clareados (p>0,05), independente do uso de antioxidantes. A espessura da camada híbrida no grupo que não foi submetido ao clareamento (REST) foi significativamente maior do que em qualquer outro grupo. A resistência de união nos grupos clareado e tratado com antioxidantes (SA, AT, CRAN, CAP) não apresentou diferenças com o grupo branqueado sem antioxidantes (BL). As falhas adesivas foram predominantes nos grupos que não receberam a aplicação do antioxidante. Em conclusão, os antioxidantes avaliados não mostraram efeito sobre a resistência à fratura, espessura da camada híbrida ou resistência de união à dentina clareada após tratamento endodôntico. A aplicação de soluções de ascorbato de sódio 10%, alfa-tocoferol 10%, cranberry 5% ou capsaicina 0,0025% não é uma etapa eficaz e não deve ser considerada para os protocolos restauradores após clareamento não vital.

Anti-erosion effect of an experimental varnish on eroded dentin

Abstract This in vitro study evaluated the effect of an experimental varnish containing 20% nano-hydroxyapatite (nHAP) associated with 5% stannous chloride (SnCl2) against erosive-abrasive wear on bovine dentin. Samples of bovine cervical dentin were pre-eroded (0.3% citric acid, pH 2.6 for 10 minutes) and randomized into 4 groups (n=10): Control group - experimental varnish without active ingredient (CG); experimental varnish containing 20% nHAP (nHG); experimental varnish containing 5% SnCl2 (24.800 ppm Sn2+) (SnG); experimental varnish containing 20% nHAP associated with 5% SnCl2 (18.300 ppm Sn2+) (nHSnG). After applying the materials, the erosive-abrasive challenges were performed for five days. Erosive dentin loss and analysis of the pattern of dentinal obliteration were performed by 3D confocal laser microscopy. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The SnG and nHSnG experimental groups presented more effectiveness in preventing erosive wear when compared to the other groups (p<0.05). There was no statistically significant difference between the SnG and nHSnG groups (p = 0.731) in tooth structure dentin loss. Regarding the amount of open dentinal tubules, the highest amount of obstructed dentinal tubules was demonstrated in SnG and nHSnG (p < 0.05) when compared to the others. Between SnG and nHSnG there was no significant difference (p = 0.952) in the amount of closed dentinal tubules in the dentin. Experimental varnishes containing 5% SnCl2 associated or not with 20% nHAP showed to be a promising strategy in preventing erosive-abrasive wear of dentin. In addition, nHSnG was able to obliterate dentinal tubules.

Resumo Este estudo in vitro avaliou o efeito de um verniz experimental contendo 20% de nano-hidroxiapatita (nHAP) associado a 5% de cloreto estanoso (SnCl2) contra o desgaste erosivo-abrasivo da dentina bovina. As amostras de dentina cervical bovina foram pré-erodificadas (0,3% de ácido cítrico, pH 2,6 durante 10 minutos) e aleatorizadas em 4 grupos (n=10): Grupo controle - verniz experimental sem ingrediente ativo (GC); verniz experimental contendo 20% nHAP (GnH); verniz experimental contendo 5% SnCl2 (24.800 ppm Sn2+) (GSn); verniz experimental contendo 20% nHAP associado a 5% SnCl2 (18.300 ppm Sn2+) (GnHSn). Após a aplicação dos materiais, os desafios erosivo-abrasivos foram realizados durante cinco dias. Perda de dentina erosiva e análise do padrão de obliteração dentinária foram realizadas por microscopia laser confocal 3D. Foi realizado o teste ANOVA/Bonferroni unidireccional para analisar os dados (α=0,05). Os grupos experimentais GSn e GnHSn apresentaram maior eficácia na prevenção do desgaste erosivo quando comparados com os outros grupos (p<0,05). Não houve diferença estatisticamente significativa entre os grupos GSn e GnHSn (p = 0,731) na perda de dentina da estrutura dentária. Relativamente à quantidade de túbulos dentinários abertos, a maior quantidade de túbulos dentinários obstruídos foi demonstrada em GSn e GnHSn (p < 0,05) quando comparada com os outros grupos. Entre GSn e GnHSn, não houve diferença significativa (p = 0,952) na quantidade de túbulos dentinários fechados na dentina. Os vernizes experimentais contendo 5% de SnCl2 associados ou não a 20% de nHAP mostraram ser uma estratégia promissora na prevenção do desgaste erosivo-abrasivo da dentina. Além disso, o GnHSn conseguiu obliterar os túbulos dentinários.

Solução estética conservadora em paciente jovem com fluorose: clareamento e microabrasão: relato de caso / Conservative aesthetic solution in a young patient with fluorosis: whitening and microabrasion: case report

Introdução: a fluorose constitui uma patologia que afeta os dentes desencadeada pelo excesso de ingestão de flúor. Sua manifestação ocorre a nível de esmalte na presença de manchas ou defeitos anatômicos. Objetivo: relatar o manejo clínico de um paciente com fluorose tratado com procedimento minimamente invasivo. Relato do caso: paciente do sexo feminino, 18 anos, apresentando queixas estéticas clinicamente observadas na vestibular dos dentes, com diagnóstico de lesões fluoróticas. Foi executado protocolo de dessensibilização com Ultra EZ por 5 min e aplicação do Verniz (Enamelast Fluoride) previamente ao tratamento clareador. Foram realizados duas sessões de clareamento com peróxido de hidrogenio 35% (DMC) por 45 min com intervalo de sete dias entre elas. Imediatamente após a segunda sessão de clareamento, foi realizado microabrasão com pasta abrasiva Whitness RM (FGM) e taça de borracha com fricção por 20 segundos. Resultados: o tratamento clareador associado a técnica da microabrasão do esmalte demonstrou resultado estético favorável, microinvasivo e eficaz no tratamento da fluorose. Conclusão: a associação dos tratamentos resolveu o problema estético da paciente de forma rápida e segura, conservando a estrutura dentária.

Introduction: fluorosis is a pathology that affects teeth triggered by excess fluoride intake. Its manifestation occurs at the enamel level in the presence of stains or anatomical defects. Objective: to report the clinical management of a patient with fluorosis treated with a minimally invasive procedure. Case report: female patient, 18 years old, presenting aesthetic complaints clinically observed in the buccal of the teeth, with a diagnosis of fluorotic lesions. A desensitization protocol was performed with Ultra EZ for 5 min and Varnish (Enamelast Fluoride) was applied prior to the bleaching treatment. Two bleaching sessions were performed with 35% hydrogen peroxide (DMC) for 45 min, with an interval of seven days between them. Immediately after the second bleaching session, microabrasion was performed with Whitness RM abrasive paste (FGM) and a rubber cup with friction for 20 seconds. Results: The bleaching treatment associated with the enamel microabrasion technique demonstrated a favorable, microinvasive and effective esthetic result in the treatment of fluorosis. Conclusion: the combination of treatments solved the patient's aesthetic problem quickly and safely, preserving the dental structure.

Anti-erosive profile of an experimental 5% SnCl₂ varnish containing different concentrations of NaF

Abstract This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl₂) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl₂-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl₂ associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl₂ associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Resumo Este estudo in vitro avaliou o efeito anti-erosivo de um verniz experimental contendo 5% de cloreto estanoso (SnCl₂) associado a diferentes concentrações de NaF (sem NaF, 2,5% NaF ou 5,2% NaF) sobre esmalte e dentina radicular bovinos. Cem amostras foram pré-erodidas (ácido cítrico 0,3%, pH 2,6, 10 min) e randomizadas em cinco grupos (n=10 para cada substrato): Controle negativo - água milli-Q; Sem NaF - Verniz experimental sem SnCl2 e sem NaF; 2,5 NaF - Verniz experimental 5% SnCl2 associado a 2,5% NaF; 5,2 NaF: Verniz experimental 5% SnCl2 associado a 5,2% NaF e controle positivo - Verniz comercial contendo 5% NaF (Duraphat). Após a aplicação dos vernizes, os desafios erosivos e abrasivos foram realizados por cinco dias. A perda de estrutura dentária (PED) foi determinada por perfilometria óptica e a perda de cálcio (ΔCa2+) por espectroscopia de absorção atômica. A análise da dentina também foi realizada por MEV. Um teste ANOVA/Bonferroni de uma via foi realizado para analisar os dados (α=0,05). Os grupos experimentais 2,5 NaF e 5,2 NaF apresentaram maior eficácia na prevenção de PED quando comparados aos demais grupos (p<0,05), independentemente do substrato. Além disso, esses grupos apresentaram menor perda no teor de Ca2+ quando comparados aos demais grupos (p<0,05), para esmalte e dentina. A dentina apresentou maior PED e de ΔCa2+ quando comparada ao esmalte em todos os tratamentos (p<0,05). Os vernizes experimentais contendo NaF 5,2% e 2,5% apresentaram resultados promissores tanto na prevenção de PED quanto na perda de Ca2+, independente do substrato estudado.

Effect of Sodium Ascorbate or Alpha-Tocopherol on the Resin-Dentin Interface and Bond Strength after Endodontic Treatment and Bleaching

ABSTRACT: The objective of this in vitro study was to assess the effects of two antioxidants (sodium ascorbate [SA] and alpha-tocopherol [AT]) on the adhesive interface and dentin bond strength immediately after bleaching with 38 % hydrogen peroxide (38HP) in endodontically-treated teeth. Two stages of experimentation were carried out. Bovine incisors were allocated into four groups (n = 10/group for each experiment): NB, non-bleached restored crowns; 38HP, bleached and immediately restored crowns; 38HP-SA, bleached crowns and SA use; and 38HP-AT, bleached crowns and AT use. Hybrid layer length in dentin (μm) and bond strength (MPa) were assessed with confocal microscopy laser and micro-shear bond strength (μSBS) test, respectively. Failure mode was determined by stereomicroscope. Data analysis was performed with analysis of variance (ANOVA) and Kruskal-Wallis, Dunn, Tukey, and Fisher-exact tests (a = 0.05). Higher values of hybrid layer length were observed similarly in the NB and 38HP-SA groups. The highest μSBS mean values were observed in the NB group (18 .51 ? 1.33), whereas the SBS values for 38HP-AT (1.68 ? 0.32) were similar to the 38HP group (1.61 ? 0.51) (p > 0.05) and significantly lower than the 38HP-SA group (5.78 ? 0.71). Adhesive failures were predominant in the 38HP and 38HP-AT groups. Cohesive and mixed failures were mostly observed in the NB and 38HP-SA groups, respectively. In conclusion, AT has no immediate effect on the hybrid layer formation and μSBS of dentin. Although SA promotes an increase in hybrid layer formation, it was not reflected in the μSBS values.

RESUMEN: El objetivo de este estudio in vitro fue evaluar los efectos de dos antioxidantes (ascorbato de sodio [AS] y alfa-tocoferol [AT]) sobre la interfaz adhesiva y la fuerza de unión de la dentina inmediatamente después del blanqueamiento con peróxido de hidrógeno al 38 % (38HP) en endodoncia. -Dientes tratados. Se llevaron a cabo dos etapas de experimentación. Los incisivos bovinos se dividieron en cuatro grupos (n = 10 / grupo para cada experimento): NB, coronas restauradas no blanqueadas; 38HP, coronas blanqueadas y restauradas inmediatamente; 38HP- AS, coronas blanqueadas y uso SA; y 38HP-AT, coronas blanqueadas y uso de AT. La longitud de la capa híbrida en dentina (μm) y la fuerza de unión (MPa) se evaluaron con láser de microscopía confocal y la prueba de fuerza de unión por micro-cizallamiento (μSBS), respectivamente. El modo de falla se determinó mediante estereomicroscopio. El análisis de los datos se realizó con análisis de varianza (ANOVA) y pruebas de Kruskal-Wallis, Dunn, Tukey y Fisher (α = 0,05). De manera similar, se observaron valores más altos de longitud de capa híbrida en los grupos NB y 38HP-AS. Los valores medios más altos de μSBS se observaron en el grupo NB (18,51 ? 1,33), mientras que los valores de SBS para 38HP-AT (1,68 ? 0,32) fueron similares a los del grupo 38HP (1,61 ? 0,51) (p> 0,05) y significativamente más bajos que el grupo 38HP-AS (5,78 ? 0,71). Las fallas adhesivas fueron predominantes en los grupos de 38HP y 38HP-AT. Las fallas cohesivas y mixtas se observaron principalmente en los grupos NB y 38HP-AS, respectivamente. En conclusión, la AT no tiene un efecto inmediato sobre la formación de la capa híbrida y el μSBS de dentina. Aunque AS promueve un aumento en la formación de capas híbridas, no se refleja en los valores de μSBS.

Molars Fracture Resistance with Class II Cavities Restored with Different Resin - Based Materials / Resistência à Fratura de Molares com Cavidades Classe II Restauradas com Diferentes Materiais à Base de Resina

The teeth weakening due to the preparation of class II mesio-occluso-distal cavities is a challenge for the clinician. The objective of this study was to evaluate the molars fracture resistance with class II mesio-occluso distal cavities restored with different restorative techniques and materials. Forty extracted molars were divided into 5 groups: Group 1 ­ intact healthy teeth (positive control); Group 2 ­ unrestored teeth with mesio-occluso distal class II cavities (negative control); Groups 3 to 5 ­ restored teeth with standardized dimensions. In groups 3 to 5, the cavities were restored with flow resin only, flow resin coated with a nano-hybrid resin, and nano-hybrid resin only, respectively. All specimens were tested for resistance to fracture using an axial compressive load, a metallic sphere measuring 8 mm in diameter on a universal testing machine EMIC DL-2000. A 10 kN load cell operated at a speed of 5 mm/min until the tooth fracture. Data were subjected to analysis of variance and Tukey's tests (α = 0.05). Group 3 showed higher fracture strength (2243.1 ± 473.7N) when compared to groups 2, 4 and 5. This difference was statistically significant (p<0.05). The fracture strength of teeth restored with flow mesio occluso-distal restorations was similar to that of intact natural teeth. (AU)

O enfraquecimento dos dentes devido às preparações de cavidades mesio-ocluso-distal é um desafio para o clínico. O objetivo deste estudo foi avaliar a resistência à fratura de molares com cavidades mesio-ocluso-distais classe II restauradas com diferentes técnicas e materiais restauradores. Quarenta molares extraídos foram divididos em 5 grupos: Grupo 1 ­ dentes saudáveis intactos (controle positivo); Grupo 2 ­ dentes não restaurados com cavidades mesio-occluso-distais classe II (controle negativo); Grupos 3 a 5 ­ dentes restaurados com dimensões padronizadas. Nos grupos 3 a 5, as cavidades foram restauradas apenas com resina flow, resina flow recoberta com uma resina nanohíbrida e somente resina nano-híbrida, respectivamente. Todas as amostras foram testadas quanto à resistência à fratura usando uma carga compressiva axial, usando uma esfera metálica medindo 8 mm de diâmetro em uma máquina de teste universal EMIC DL-2000. Uma célula de carga de 10 kN operava a uma velocidade de 5 mm/min até a fratura do dente. Os dados foram submetidos à análise de variância e testes de Tukey (α = 0,05). O grupo 3 apresentou maior resistência à fratura (2243,1 ± 473,7N) quando comparado aos grupos 2, 4 e 5. Essa diferença foi estatisticamente significante (p <0,05). A resistência à fratura dos dentes restaurados com resina flow foi semelhante à dos dentes naturais intactos. (AU)

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study

ABSTRACT Objective: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. Methods: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. Results: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. Conclusion: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

RESUMO Objetivo: O objetivo do presente estudo in vitro foi avaliar o efeito antimicrobiano de cinco tipos de probióticos não industrializados ou industrializados em biofilmes formados ao redor de mini-implantes ortodônticos. A hipótese nula testada foi: não há diferença no efeito antimicrobiano entre os cinco tipos de probióticos testados em torno dos mini-implantes ortodônticos. Métodos: Para o experimento, as cabeças de 120 mini-implantes foram imersas por sete dias em solução de Staphylococcus aureus para formação de biofilme e, posteriormente, semeadas em meio de cultura contendo probióticos. Os mini-implantes foram divididos em seis grupos diferentes, de acordo com o probiótico utilizado: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) lactobacilos do leite fermentado Yakult®; G5) lactobacilos do leite fermentado Batavito®; e G6) sem uso de probiótico, como controle negativo. As análises qualitativas e quantitativas de todos os grupos foram realizadas usando a contagem de UFCs (unidades formadoras de colônia). Resultados: O estudo mostrou que os grupos G4 e G6 não apresentaram atividade antimicrobiana, em comparação aos grupos G1, G2, G3 e G5 (p< 0,05), os quais demonstraram atividade antimicrobiana. Conclusão: As bactérias probióticas não comerciais, Lactobacillus casei e Lactobacillus rhamnosus, assim como o leite fermentado comercializado, Batavito®, apresentaram resultados promissores na redução da colonização dos mini-implantes por S. aureus. Portanto, a hipótese nula foi rejeitada.

Factors associated with depression, anxiety and stress among dentists during the COVID-19 pandemic

Abstract The objective of this work was to evaluate the relationship between factors associated with the COVID-19 pandemic and depression, anxiety, and stress (DAS) in dentists. Factors associated with the COVID-19 pandemic were evaluated using a questionnaire and scores of the Depression, Anxiety, and Stress Scales-21 were measured. The differences between the DAS scores based on the factors associated with the COVID-19 pandemic were tested through the successive application of multivariate analysis of variance (MANOVA, α = 0.05). After a sample size calculation, 998 participants with a mean age of 39.39 (± 11.69) years were included. The effect size indicated that changes in sleep quality (η2 = 0.161), eating habits (η2 = 0.057), and physical health (η2 = 0.051) were the ones that most negatively affected DAS scores. The highest DAS scores were observed in professionals who lived with someone at high-risk for COVID-19 (p < 0.001) and in those who did not engage in leisure activities during the pandemic (p < 0.001). Dentists who worked on the frontline against COVID-19 had higher scores of anxiety and stress (p = 0.029). The highest scores for anxiety, depression, and/or stress were seen in dentists living with someone at high-risk for COVID-19, who acts on the frontline, who does not practice in leisure activities during the pandemic, who completely changed eating habits, quality of sleep and physical health during the pandemic. In general, DAS levels of dentists were associated with factors related to the COVID-19 pandemic.

Assessment of Marginal Adaptation Before and After Thermo-Mechanical Loading and Volumetric Shrinkage: Bulk Fill versus Conventional Composite / Evaluación de la Adaptación Marginal Antes y Después de la Carga Termomecánica y la Contracción Volumétrica: Relleno Bulk-Fill- versus Compuesto Convencional

ABSTRACT: The objective of the study was to evaluate marginal adaptation of Class II mesial-occlusal-distal (MOD) restorations before and after thermo-mechanical loading and volumetric shrinkage of the bulk-fill vs conventional composite resin. For marginal adaptation assessment, 24 Class II MOD cavities with cervical margins extending 1.0 mm below (distal) and 1.0 mm beyond (mesial) the cement-enamel junction were prepared in extracted human molars. The teeth were filled as follows: Group A - bulk-fill with SureFil SDR flow (first increment, 4 mm; second increment, 2 mm); Group B - bulk-fill with SureFil SDR flow as a base (first increment, 4 mm) and covered with the conventional nanohybrid composite Esthet-X HD (second increment, 2 mm); and Group C - incrementally filled with Esthet-X HD. Marginal adaptation was evaluated by scanning electron microscopy before and after thermomechanical loading (240,000 loading cycles and simultaneous 600 thermal cycles). To evaluate volumetric polymerization shrinkage, a semi-spherical mold was filled with the tested composites and placed in an AccuVol device after light curing. Both before and after loading, marginal adaptation in cervical dentin was superior (p < 0.05) for Groups A and B compared with Group C. In cervical enamel, Group B showed better marginal adaptation than Group C, and Group A presented intermediary results, between Groups B and C. Furthermore, bulk-fill flow resulted in greater shrinkage than Esthet-X HD. A significant improvement of marginal adaptation was observed when bulkfill flow was used instead of conventional composite resin both before and after thermomechanical loading. However, the bulk-fill flow presented higher volumetric polymerization shrinkage than the conventional composite.

RESUMEN: El objetivo de este trabajo consistió en evaluar la adaptación marginal de las restauraciones mesiales-oclusales-distales (MOD) de Clase II antes y después de la carga termo-mecánica y la contracción volumétrica de la carga compuesta de resina "bulk-fill" en comparación con resina convencional. Para la evaluación de adaptación, se prepararon 24 cavidades MOD de Clase II en molares humanos extraídos, los que se restauraron de la siguiente manera: Grupo A: restaurado con resina fluida Bulk-Fill SureFilSDR (primer incremento, 4 mm; segundo incremento, 2 mm); Grupo B: restaurado con resina fluida Bulk-Fill SureFil SDR (primer incremento, 4 mm) y cubierto con resina compuesta nanohíbrida Esthet-X HD (segundo incremento, 2 mm); y Grupo C - rellenado incrementalmente con Esthet-X HD. La adaptación marginal se evaluó mediante microscopía electrónica de barrido antes y después de la carga termomecánica (240.000 ciclos de carga y 600 ciclos térmicos simultáneos). Para evaluar la contracción volumétrica de la polimerización, se llenó un molde semiesférico con los compuestos probados y se colocó en un dispositivo AccuVol después del fotopolimerización. Tanto antes como después de la carga, la adaptación marginal en la dentina cervical fue superior (p <0,05) para los grupos A y B en comparación con el grupo C. En el esmalte cervical, el grupo B mostró una mejor adaptación marginal que el grupo C, y el grupo A presentó resultados intermedios, entre Grupos B y C. Se observó una mejora significativa de la adaptación marginal al utilizar la resina fluida Bulk-Fill en lugar de resina compuesta convencional tanto antes como después de la carga termomecánica. Sin embargo, la resina fluida 'Bulk-Fill' presentó una mayor contracción volumétrica de polimerización que el compuesto convencional.

Evaluation of physical-mechanical properties of self-adhesive versus conventional resin cements

Aim: The purpose of this study was to compare the microhardness, diametral tensile strength, compressive strength and the rheological properties of self-adhesive versus conventional resin cements. Methods: Specimens of a conventional (RelyX ARC) and 3 self-adhesive (RelyX U200, Maxcem Elite, Bifix SE) types of resin cements were prepared. The Knoop test was used to assess the microhardness, using a Microhardness Tester FM 700. For the diametral tensile strength test, a tensile strength was applied at a speed of 0.6 mm/minute. A universal testing machine was used for the analysis of compressive strength and a thermo-controlled oscillating rheometer was used for the Rheology test. One-way ANOVA and Tukey's test (α=0.05) were used for data analysis. Results:According to microhardness analysis, all the cements were statistically similar (p>0.05), except for Maxcem that presented lower hardness compared with the other cements in relation to the top surface (p<0.05). In the diametral tensile strength test, Relyx U200 and RelyX ARC cements were statistically similar (p>0.05), presented higher value when compared to the Maxcem and Bifix cements (p<0.05). The compressive strength of RelyX ARC and Maxcem Elite cements was statistically higher than RelyX U200 and Bifix cements (p<0.05). Regarding the rheology test, Maxcem Elite and RelyX ARC cements showed a high modulus of elasticity. Conclusions: The self-adhesive cements presented poorer mechanical properties than conventional resin cement. Chemical structure and types of monomers employed interfere directly in the mechanical properties of resin cements

Randomized clinical trial of the effect of NovaMin and CPP-ACPF in combination with dental bleaching

Abstract Objective This randomized, controlled, double-blind clinical study evaluated the effect of calcium sodium phosphosilicate (NovaMin) and casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) on the prevention of post-operative sensitivity and on the effects of clinical bleaching treatment. Material and Methods Sixty volunteers were selected according to inclusion and exclusion criteria and were randomly assigned into three groups (n=20): CG (control group) patients, who were treated with 35% hydrogen peroxide; NOVAG (NovaMin group) patients, who were treated with 35% hydrogen peroxide followed by the application of NovaMin; and CPPG (CPP group) patients, who were treated with 35% hydrogen peroxide followed by the application of CPP-ACPF. Both bioactive agents were applied for five minutes. An evaporative stimulus associated with a modified visual scale was used to analyze sensitivity 24 hours after each bleaching session. The color evaluation was performed on the maxillary central incisors using a spectrophotometer. Associations between the intervention group, bleaching session, and reported sensitivity were tested using Chi-square partitioning. Results Color change values (ΔE) were analyzed using analysis of variance (ANOVA). The significance level used for both tests was 5%. In the intragroup assessment, the Friedman test showed that only the CPP-ACPF group showed no statistically significant difference (p<0.05) between baseline and first bleaching session. In the intergroup assessment, the Kruskal-Wallis test showed that the CPPG had less postoperative sensitivity after the first session, when compared to the other groups (p<0.05). Color change analysis (ΔE) showed a significant difference between the means obtained in the different bleaching sessions in all groups (p<0.05). Conclusions This study showed that the combination of CPP-ACPF with 35% hydrogen peroxide significantly reduced post-operative sensitivity in the first session, compared with the other evaluated treatments. The association of CPP-ACPF and NovaMin did not affect the color change induced by tooth bleaching.